Skip to content

Managing Transmitter Streams

Shared Signals Framework uses transmitter streams to transmit events to other receivers. Configured streams are displayed on the Transmitting Streams page. Go to Admin > Connections > Shared Signals > Transmitting Streams to view and manage your transmitter streams.

Configuring Event Conditions

Create event conditions where, if met, events are published to the transmitting stream and then viewable in event logs.

  1. Go to Admin > Connections > Shared Signals > Transmitting Streams.

  2. Select Configure Events to open the Event Configuration page.

  3. Select the event type you want to configure conditions for. The conditions will differ for each event type.

Session Revoked Events

For Session Revoked events, the conditions are mappings between identity profiles and lifecycle states. Events are published to enabled transmitter streams whenever an identity enters a configured lifecycle state.

  1. Select Create Condition.

  2. Choose an Identity Profile.

  3. Select one or more Lifecycle States.

  4. Select Save.

Managing Event Conditions

To edit an event condition:

  1. From the event type’s Conditions page, select the Actions icon and choose Edit.

  2. Make any changes you want, and then select Save.

To delete an event condition:

  1. From the event type’s Conditions page, select the Actions icon and choose Delete.

  2. Confirm by selecting Delete.

Managing a Transmitter Stream

Pausing a transmitter stream stops all active signals from the transmitter, preventing any further events from being processed.

To pause a transmitter stream:

  1. From the Transmitter Streams list, select the Actions icon for the stream you want to pause.

  2. Select Pause.

To enable or disable a transmitter stream:

  1. From the Transmitter Streams list, select the Actions icon for the stream you want to enable or disable.

  2. Select Enable or Disable.

To verify the stream connection:

  1. From the Transmitter Streams list, select the Actions icon for the stream you want to verify.

  2. Select Verify Connection.

    This initiates stream verification. You can view the connection verification status in Event Logs.

Viewing Details

Selecting a transmitter stream opens the Transmitter Stream Details page. View event data associated with the selected transmitter stream.

From the Details tab, you can select a Date Range to see how many events occurred in the selected range. Choose between the last 1, 7, 30, 60 or 90 days. Event data will refresh based on the selected date range.

Viewing Events

From the Event Log tab, all events logged for that transmitter stream along with the status of the event are displayed. You can search for events by keywords used in the Events Summary field.

Filter events by Identity, Event Type, Event Date, and Event Status.

To filter events:

  1. Select the Filter icon  to filter the events.

    • Select an Identity. You can make one or more selections.

    • Select an Event Type. You can make one or more selections.

    • Select an Event Date. You can make one or more selections.

    • Select an Event Status. You can make one or more selections.

  2. Select Apply to view your results.

  3. Select Clear Filters to clear all selections and start over.

Select the Actions icon  to view the JSON of the event summary.

Documentation Feedback

Feedback is provided as an informational resource only and does not form part of SailPoint’s official product documentation. SailPoint does not warrant or make any guarantees about the feedback (including without limitation as to its accuracy, relevance, or reliability). All feedback is subject to the terms set forth at https://developer.sailpoint.com/discuss/tos.