Connecting SailPoint and Snowflake SaaS

To connect SailPoint with Snowflake, perform the following tasks:

Adding the Source in SailPoint

To connect to SailPoint, perform the following steps. Once the connection is made, you can configure it to meet your company's needs.

To configure a new source:

1. Sign in to SailPoint.
2. Go to Admin > Connections > Sources.
3. Select Create New.
4. Search for the connector by entering the name in the search box, and then select Actions.

5. In the Actions dropdown list, select the setup method:

   • Express Setup - Quickly create a read-only connection to your target system by providing minimal configurations and authentication. On completion, aggregation is automatically started.

     Note

     Express Setup supports Credential Providers. For information on supported credential providers and configuration, refer to Credential Providers. For more information, contact your SailPoint Customer Service Manager.

   • Standard Setup - Provide detailed basic configuration to create the source. Once the source is created, continue with source setup.

Configuring a Source Using Express Setup

Express Setup minimizes the initial configuration process so you can quickly connect the application and immediately begin aggregating user account and entitlement data.

1. Review the directions and select Start Express Setup.

2. Review the pre-populated Source Name, Source Owner, and Description. To update, select Edit.

   Note

   The source name must be unique. You can change these settings later in the source configuration.

3. (Optional) If enabled for your organization, select the Use a Credential Provider checkbox to manage the source's authentication using a credential provider.

   Note

   To add a Credential Provider in SailPoint, go to Admin > Connections > Credential Providers. For more information about credential providers, refer to Credential Providers.

4. Configure the authentication to allow SailPoint to connect to the source. For more information, refer to the Connection Settings section.

5. Select Finish.

   After a successful test connection, the system creates your source and prompts you to run an aggregation.

   • If you want to aggregate now, select Aggregate.

     • To see the latest account aggregation history, go to Account Management > Account Aggregation.
     • To see the list of aggregated source accounts, go to Account Management > Accounts.

   • If you want to aggregate later, select Exit. This returns you to the Sources page. Your new source is listed, but contains no accounts or aggregation history yet.

Configuring a Source Using Standard Setup

Use Standard Setup to configure the connector for full feature support.

1. In the Source Name field, enter a unique and descriptive name for your source. Source names cannot exceed 128 characters.
2. In the Description field, provide additional details about the source to help distinguish it from similar sources. This field allows a maximum of 2,000 characters.
3. In the Source Owner field, begin typing the name of an owner. Matches appear after you type two or more letters. For more information, refer to Assigning a Source Owner.
4. (Optional) Select a governance group to grant its members source or role sub-admin level oversight of the source and its access. For more information, refer to Creating and Managing Governance Groups.
5. If this source represents a primary system containing your organization's personnel records, select the Authoritative Source checkbox. For more information, refer to Creating Identity Profiles.
6. Select Continue. The source is created, and you are navigated to the Source Setup > Base Configuration page. Continue to configure your connected source there.

Base Configuration

Provide the base configuration parameters. Information you entered in the Create New Source dialog is automatically entered into the fields in the Base Configuration page. You can edit this information if necessary.

1. Enter a unique name and description for the source.

2. In the Source Owner dropdown list, select the identity that owns this source.

   • To find a source owner, begin entering their name.

3. (Optional) If enabled for your organization, select the Use a Credential Provider checkbox to manage the source's authentication using a credential provider.

   Note

   To add a credential provider, go to Admin > Connections > Credential Providers. For more information about credential providers, refer to Credential Providers.

4. Configure the authentication to allow SailPoint to connect to the source. Refer to Connection Settings for more information.

5. (Optional) In the Governance Group for Source Management dropdown list, select a governance group to associate with this source. For more information about governance groups, refer to Associating Governance Groups with a Source.

6. (Optional) Choose whether to enable or disable provisioning for the source. Provisioning is disabled by default.

   • Enable Provisioning - Set the toggle to Enabled to allow the source to create, update, and deactivate accounts in the connected source system.

   • Disable Provisioning - Set the toggle to Disabled to disable provisioning for the source. Disabling provisioning will prevent the creation, updating, or deactivating of accounts on this source.

7. Select Save.

Connection Settings

Provide the information required to connect and interact with the source.

You can use the following commands to query the Snowflake system to find the URL, Organization, and Account information:

USE ROLE ORGADMIN;
SHOW ORGANIZATION ACCOUNTS;

To configure connection settings, complete the following:

1. Enter the Base URL to connect to the Snowflake system. For example, https://<organization>-<account>.snowflakecomputing.com.
2. Select the Authentication Type used to connect to the Snowflake system.
3. Enter the Organization configured in the Snowflake organization.
4. Enter the Snowflake Account configured for the Snowflake organization.
5. Enter the Username to log into the Snowflake organization account.

6. Enter the Private Key used to authenticate with the Snowflake system. For more information on generating private keys, refer to Generating Keys.

   Note

   When you enter the private key you must enter the whole private key, including the BEGIN PRIVATE KEY and END PRIVATE KEY lines. For example:

   -----BEGIN ENCRYPTED PRIVATE KEY-----
   *HASH VALUE*
   -----END ENCRYPTED PRIVATE KEY-----
   

7. Enter the Passphrase to validate the private key. This was created when you generated the public and private keys.

8. Select Save.

Configure Database Filter Settings

You can enter the names of any databases to include or exclude from connector operations.

SNOWFLAKE, SALES_DB, "hr@DB", "admin-db"

1. Do either of the following:
   • In the Include Databases field, enter a comma-separated list of databases names to include in aggregation and provisioning operations.
   • In the Exclude Databases field, enter a comma-separated list of databases names to exclude from aggregation and provisioning operations.
2. Select Save.

Configuring Machine Identity Governance

Enable the connector to aggregate Snowflake Cortex Agents in aggregation processes.

Before you start, you must set the required permissions in the source to aggregate Snowflake Cortex Agents. For more information, refer to Machine Identity Aggregation Permissions.

1. Select Enable Snowflake Cortex Agent.
2. Select Save.

Aggregation Settings

On the Aggregation Settings page, configure the filter settings. Filter settings allow users to filter Snowflake users and roles based on attributes.

For more information about aggregation, refer to Loading Account Data.

1. Enter the Account Filter conditions. For example,

   "name" ILIKE '%SailpointUser%' AND "login_name" ILIKE '%SailpointLogin%'
   

   Note

   The attribute name should start and end with double quotes (" "), and the value should start and end with single quotes (' ').

2. Enter the Role Filter conditions. For example,

   "name" ILIKE '%SYSADMIN%' AND "owner" = 'XYZ'
   

   Note

   • The attribute name should start and end with double quotes (" "), and the value should start and end with single quotes (' ').
   • The above examples are SQL queries where clause conditions, however, you may add any clause condition of SQL queries.

3. Select the Validate Filters During Test Connection option to enable it. The filter works in the background by running multiple SQL statements in a single request. For example,

   SHOW USERS; SELECT * FROM TABLE(RESULT_SCAN(LAST_QUERY_ID())) WHERE "name" ILIKE '%SailpointUser %' AND "owner" = 'ACCOUNTADMIN';
   

4. Select Save.

Activity Insights Settings

SailPoint pulls in activity data in the form of events like user logins, password changes, and content updates within the application. You can view an identity’s activity data within an application to discover trends for that user.

Activity Insights Settings allows you to gather account information and activity data from Snowflake. To enable Activity Insights for the Snowflake application, refer to Prerequisites for more information.

To configure Activity Insights, complete the following:

1. Go to Activity Insights Settings.
2. Select Enable Activity Insights to view access to data insights on source and application activity such as logins and other app-specific events.
3. Select Save.

Review and Test

Perform a test to confirm the connection to SailPoint.

1. Go to Review and Test.

2. Confirm that the entries in each field are correct.

   If you note any mistakes, return to the section and make corrections.

3. Select Test Connection.

SailPoint Application Onboarding

SailPoint application onboarding enables you to easily onboard new applications and create sources following the successful onboarding of a discovery source. To use this feature, continue to Discovered Applications in the SailPoint user interface.

For more information, refer to Application Onboarding in the SailPoint SaaS documentation.

Documentation Feedback

Feedback is provided as an informational resource only and does not form part of SailPoint’s official product documentation. SailPoint does not warrant or make any guarantees about the feedback (including without limitation as to its accuracy, relevance, or reliability). All feedback is subject to the terms set forth at https://developer.sailpoint.com/discuss/tos.