IQService Settings

Install IQService to support execution of provisioning operations and native rules. IQService is required by the Active Directory connector for all provisioning, and for reading certain fields from a user's entry, including Terminal Services and Lync attributes.

Note
IQService has the built-in capability to auto update (this is the default). To enable the auto update capability, UpdateService must be configured alongside the IQService installation. For more information, refer to Configuring IQService Auto Update in the Updating IQService topic.

Note
You are only entitled to download components for which you have an active license with SailPoint and the availability of a component for download does not grant you a license to use a component or entitle you to use a component for which you do not have an active license. Please contact your Account Representative or CSM for more information.

Download IQService

To download the IQService installation, complete the following:

1. Download and install IQService using one of the following methods:

   • Select the Download IQService button.

   • Download the software directly from https://s3.amazonaws.com/files.accessiq.sailpoint.com/integrations/iqservice/IQService.zip.

   • Download, install, and configure IQService by following the steps mentioned in the IQService Administrator's Guide for Installing and Registering IQService.

2. Unzip the downloaded IQService .zip archive into the desired location. For example, C:\SailPoint\IQService

   Verify the DLLs are trusted by checking the properties of the DLL files.

3. Run one of the following commands to install IQService and specify the TLS port information:

   • Run the following command to install IQService without specifying the TLS port: IQService.exe -i

     This command installs IQService with a name of IQService-Instance1 and connects to port 5050 (if available).

   • Run the following command to install IQService with the TLS port: IQService.exe -i -o TLS port number

     This command installs IQService with a name of IQService-Instance1 and connects to the specified port number. For more information on requirements and procedures to setup TLS communication and client authentication, refer to Configuring TLS and Client Authentication for IQService.

   • Run the following command to install IQService to communicate on TLS and non-TLS ports: IQService -i -p Non-TLS port number -o TLS port number

     This command installs IQService with a name of IQService-Instance1 and the specified TLS and non-TLS ports.

4. Start the service from the services applet or from the command line, using the following command: IQService.exe -s

Configure IQService Settings

To configure the IQService settings, complete the following:

1. (Optional) In the IQService Host field, enter the host name or IP address of the system where IQService is installed.

2. (Optional) Enter the IQService Port number used to connect. If you enable TLS, configure the corresponding IQService TLS port.

3. (Optional) Enter the IQService User for client authentication.

4. (Optional) Enter the IQService Password for the IQService user.

5. (Optional) By default, the Use Transport Layer Security (TLS) checkbox is selected. For more information, refer to IQService: TLS and client authentication configuration.

6. Select Save.