# SailPoint Webex Meetings Connector Documentation > Webex Meetings Connector Documentation # Documentation # Connecting SailPoint and Webex Meetings To connect SailPoint with Webex Meetings, perform the following tasks: ## Adding the Source in SailPoint To connect to SailPoint, perform the following steps. Once the connection is made, you can configure it to meet your company's needs. > [!IMPORTANT] > > By default, the provisioning feature is **disabled**, and the connector only supports read-only operations. To support provisioning operations, you must manually enable the feature in the source configuration. **To configure a new source:** 1. Sign in to SailPoint. 2. Go to **Admin \> Connections \> Sources**. 3. Select **Create New**. 4. Search for the connector by entering the name in the search box, and then select **Actions**. 5. In the **Actions** dropdown list, select the setup method: - [**Express Setup**](<#configuring-a-source-using-express-setup>) - Quickly create a read-only connection to your target system by providing minimal configurations and authentication. On completion, aggregation is automatically started. > **Note** > > Express Setup supports Credential Providers. For information on supported credential providers and configuration, refer to [Credential Providers](). For more information, contact your SailPoint Customer Service Manager. - [**Standard Setup**](<#configuring-a-source-using-standard-setup>) - Provide detailed basic configuration to create the source. Once the source is created, continue with source setup. ### Configuring a Source Using Express Setup Express Setup minimizes the initial configuration process so you can quickly connect the application and immediately begin aggregating user account and entitlement data. 1. Review the directions and select **Start Express Setup**. 2. Review the pre-populated **Source Name**, **Source Owner**, and **Description**. To update, select **Edit**. > **Note** > > The source name must be unique. You can change these settings later in the source configuration. 3. Select **Virtual Appliance**. A virtual appliance is a Linux-based virtual machine that connects to your sources and apps using SailPoint APIs, connectors, and integrations. For more information about configuring and deploying virtual appliances, refer to [SailPoint Virtual Appliances](). 4. (Optional) If enabled for your organization, select the **Use a Credential Provider** checkbox to manage the source's authentication using a credential provider. > **Note** > > To add a Credential Provider in SailPoint, go to **Admin \> Connections \> Credential Providers**. For more information about credential providers, refer to [Credential Providers](). 5. Configure the authentication to allow SailPoint to connect to the source. For more information, refer to the **Connection Settings** section. 6. Select **Finish**. After a successful test connection, the system creates your source and prompts you to run an aggregation. - If you want to aggregate now, select **Aggregate**. - To see the latest account aggregation history, go to **Account Management \> Account Aggregation**. - To see the list of aggregated source accounts, go to **Account Management \> Accounts**. - If you want to aggregate later, select **Exit**. This returns you to the **Sources** page. Your new source is listed, but contains no accounts or aggregation history yet. ### Configuring a Source Using Standard Setup Use Standard Setup to configure the connector for full feature support. 1. In the **Source Name** field, enter a unique and descriptive name for your source. Source names cannot exceed 128 characters. 2. In the **Description** field, provide additional details about the source to help distinguish it from similar sources. This field allows a maximum of 2,000 characters. 3. In the **Source Owner** field, begin typing the name of an owner. Matches appear after you type two or more letters. For more information, refer to [Assigning a Source Owner](). 4. Under **Connection Type**, select **Direct Connection** or **Flat File**. - **Direct Connection** - A direct connection fetches data from the **Virtual Appliance Cluster** you choose as the application connector for the source. A direct connection configuration allows for real-time updates. For more information about configuring and deploying virtual appliances, refer to the [Virtual Appliance Reference Guide](). - **Flat File** - Select the flat file if no connector is available, or if another system restricts the connection. This option allows only reading and aggregating data as a generic/delimited application. Provisioning activity is unsupported, and additional configuration pages like connection settings and aggregation settings are unavailable. 5. If you selected **Direct Connection**, in **Virtual Appliance Cluster**, select the virtual appliance cluster that will be used as the application connector for the source. 6. (Optional) Select a governance group to grant its members [source]() or [role]() sub-admin level oversight of the source and its access. For more information, refer to [Creating and Managing Governance Groups](). 7. If this source represents a primary system containing your organization's personnel records, select the **Authoritative Source** checkbox. For more information, refer to [Creating Identity Profiles](). 8. Select **Continue**. The source is created, and you are navigated to the **Source Setup \> Base Configuration** page. Continue to configure your connected source there. ## Base Configuration Provide the base configuration parameters. Information you entered in the Create New Source dialog is automatically entered into the fields in the Base Configuration page. You can edit this information if necessary. 1. Enter a unique name and description for the source. 2. In the **Source Owner** dropdown list, select the identity that owns this source. - To find a source owner, begin entering their name. 3. In the **Virtual Appliance Cluster** dropdown list, select the virtual appliance to use when communicating with your organization's systems. For more information, refer to [SailPoint Virtual Appliances](). 4. (Optional) If enabled for your organization, select the **Use a Credential Provider** checkbox to manage the source's authentication using a credential provider. > **Note** > > To add a credential provider, go to **Admin \> Connections \> Credential Providers**. For more information about credential providers, refer to [Credential Providers](). 5. Configure the authentication to allow SailPoint to connect to the source. Refer to [Connection Settings](<#connection-settings>) for more information. 6. (Optional) In the **Governance Group for Source Management** dropdown list, select a governance group to associate with this source. For more information about governance groups, refer to [Associating Governance Groups with a Source](). 7. (Optional) Choose whether to enable or disable provisioning for the source. Provisioning is disabled by default. - **Enable Provisioning** - Set the toggle to **Enabled** to allow the source to create, update, and deactivate accounts in the connected source system. - **Disable Provisioning** - Set the toggle to **Disabled** to disable provisioning for the source. Disabling provisioning will prevent the creation, updating, or deactivating of accounts on this source. 8. Select **Save**. ## Connection Settings This task enables you to configure the connection between SailPoint and your Webex Meetings source. > [!NOTE] > > **Screenshot** > > [![Connection Settings]()]() 1. Select **Connection Settings** from the menu. 2. Enter the **Host URL** provided by Webex Meetings. 3. Enter the **XML URL**. 4. (Optional) Enter the **Partner ID**. 5. Enter the Webex Meetings user ID in **Webex ID**. 6. Enter the **Password** for the Webex Meetings user ID. 7. Select **Save**. ## Aggregation Settings For more information about aggregation, refer to [Loading Account Data](). > [!NOTE] > > **Screenshot** > > [![Aggregation Settings]()]() 1. Select **Aggregation Settings** from the menu. 2. Set the **Page Size** as the number of records that you can fetch in one request. 3. (Optional) Select the option to enable **Aggregate Disabled Accounts** if you want disabled accounts to be included in the aggregation. 4. Select **Save**. ## Review and Test Perform a test to confirm the connection to SailPoint. 1. Go to **Review and Test**. 2. Confirm that the entries in each field are correct. If you note any mistakes, return to the section and make corrections. 3. Select **Test Connection**. ## SailPoint Application Onboarding SailPoint application onboarding enables you to easily onboard new applications and create sources following the successful onboarding of a discovery source. To use this feature, continue to **Discovered Applications** in the SailPoint user interface. For more information, refer to [Application Onboarding]() in the SailPoint SaaS documentation. # Integrating SailPoint with Webex Meetings This guide is designed to give specific information about the requirements and field definitions needed to get a working instance of a Webex Meetings source. To manage Webex Meetings user account data, either create an [identity profile]() based on the source or verify that the accounts you load are [correlated]() to an existing identity. > [!NOTE] > > This is a standard source for accounts but an advanced source for provisioning. Please open a [support ticket]() for assistance. > [!NOTE] > > To view the latest features, enhancements, and fixes for all SaaS connectors, refer to the [SaaS Release Notes]() page. ## Supported Features SailPoint's Webex Meetings source supports the following features: - Load and \*provision Webex Meetings Accounts - \*Access Certifications (certification of entitlements connected to accounts) - \*Password management For more information on features, refer to [Source Features](). > [!NOTE] > > Before you can use any item above marked with an asterisk (\*), SailPoint must activate the feature for your site. ### Password Management If Password Management is enabled for your organization, you can change the password for a user of the source. After enabling password management on the source, be aware of the following: - The password policy defined in SailPoint applies to accounts on this source. - If you change the password for an application connected to this source, the change will automatically be made to the source itself. For more information on configuring password management, refer to [Password Management Overview](). ## Prerequisites - Configure at least one virtual appliance cluster and successfully test the connection. For more information, refer to the [Virtual Appliance Reference Guide](). ## Required Permissions - The user must be a **Site Administrator**. # Provisioning The Webex Meetings connector supports provisioning, allowing you to create and manage accounts and entitlements in Webex Meetings directly from SailPoint. **Prerequisite:** Your system is configured for provisioning. When SailPoint provisions new accounts to the source, it uses the attributes on the **Create Account** page as instructions or a template for what to include in the account. This page is also referred to as the *provisioning policy*. When new access is granted on a source where a user does not already have an account, SailPoint automatically includes account creation in the provisioning. This applies whether provisioning is started from an access request or from an automated role or lifecycle state assignment. For direct-connect sources, SailPoint automatically creates the account from this configuration. If the source is not configured as a direct-connect source, SailPoint creates and assigns a provisioning task to the source owner and includes the values for the source owner to use in manually creating the account. > [!IMPORTANT] > > This section describes the default **Create Account** configuration. SailPoint recommends that you work with Services to define a provisioning configuration specific to your company's needs. Be sure to verify large changes to the provisioning policy before implementation. Failure to do so might cause provisioning to fail. ## Default Create Account Attributes | Account Attribute | Generator | Description | | --- | --- | --- | | WebexID | Create Unique Account ID | This generator uses the value in the **Pattern Used** field to generate a unique WebexID for the new account. | | FirstName | Identity Attribute | The first name of the user. | | LastName | Identity Attribute | The last name of the user. | | Email | Identity Attribute | The email ID of the user. | | password | Generator | This generator creates an initial password for the new account that matches the password policy assigned to the associated Webex Meetings source in SailPoint. | | AccountType | Static | The type of account. Host: Indicates whether the user is the host for the meeting. SiteAdmin: Indicates whether the user has administrative privilege for the meeting. SiteAdminWithViewOnly: Indicates whether the current user is a site administrator with view only privilege. | > [!NOTE] > > The Webex Meetings source supports the updates to simple account attributes. # Schema Reference The application schema is used to configure the objects returned from a connector. > [!NOTE] > > - The **Account Schema** tab is used to define the attributes for each object type in the application being configured. The schema attributes can be defined as **Entitlement** or **Multi-Valued**. Refer to [Managing Source Account Schemas]() for more information. > - The schema attributes that are not present by [default](<#default-account-schema>) must be defined as strings if not specified. The Webex Meetings connector uses the following default correlation and object configurations. ## Default Account Schema Each source supports a variety of details, or attributes, about each user who has an account, such as their name, email address, manager name, and location. The set of account attributes each source stores and how they're organized is known as the account's *schema*. To best represent your data, you can configure sources to use an account schema matching the one you use in the external connector. Refer to [Managing Source Account Schemas]() for more information. ### Default Account ID SailPoint requires that certain attributes remain in your configuration. These attributes are referred to as *account IDs*. > [!CAUTION] > > Changing the attribute marked as the account ID after aggregating accounts can result in duplicate accounts being created. To avoid this, either reset the accounts on this source before editing the account ID attribute or edit the account ID attribute before aggregating accounts. > > To resolve issues caused by changing account IDs, reconfigure them to their default values. The following table lists the default account IDs for this connector: | Account ID | Schema Object Type | | --- | --- | | WebexID | Account | | MeetingTypeID | Group | ### Default Account Attributes The Webex Meetings connector supports the following default account schema attributes and customer configurable attributes. The attributes must be defined as strings if not specified. | Attribute Name | Description | | --- | --- | | WebexID | The Webex ID of the user. | | FirstName | The first name of the user. | | LastName | The last name of the user. | | Email | The email ID of the user. | | RegistrationDate | The creation date of the user | | Active | Indicates whether the user account has been staged for use. Default: ACTIVATED

**Note:** If you set the user's active parameter to ACTIVATED such that the Webex Meetings site's host limit is exceeded, the `CreateUser` or `SetUser` command displays the following error: `exceededSiteHostLimit` | | TimezoneID | Indicates the time zone for the geographic location of the meeting. | | Company | The user's company name. | | Description | A description of the user's virtual office. | | CategoryID | A reference to the office category for the user's office. | | AddressType | Indicates whether the meeting participant is a personal contact of the meeting host or is a site-wide (global) contact. | | Country | The country for the user. | | Phone | The user's Office Profile phone number. | | MobilePhone | The attendee's mobile phone number. | | Fax | The fax number for the user. | | Pager | The user's Office Profile pager number. | | PersonalURL | The user's website. | | ExpirationDate | A Webex Meetings-maintained date and time at which the user's account expires. | | Prod/ServiceAnnouncement | Product or service announcements. | | TrainingInfo | Training information. | | ElectronicInfo | Electronic information. | | Promos | Promotions and special offers. | | PressRelease | Press releases. | | UserEmail | The email address as stored in the user profile. | | UserPhone | The phone number for the user. | | MailInfo | The mail information for the user. | | TimeZone | The time zone for the geographic location of the user or user's office. | | TimeZoneWithDST | A timezone description which is adjusted by DST. For example, GMT-7:00, Pacific (San Francisco) | | Service | The type of service that the user has. | | Host | Indicates whether the user is the host for the meeting. | | TelephoneConferenceCallOut | Indicates whether conference calling out of meetings is supported for the meeting. | | TelephoneConferenceCallOutInternational | Indicates whether international calling out of meetings is supported for the meeting. | | TelephoneConferenceCallIn | Indicates whether conference calling into meetings is supported for the meeting. | | TelephoneConferenceTollFreeCallIn | Indicates whether toll-free calling into meetings is supported for the user. | | SiteAdmin | Indicates whether the user has administrative privilege for the meeting. | | VOIP | Specifies whether Voice Over IP telephony is enabled. | | SiteAdminwithViewOnly | Indicates whether the current user is a site administrator with view only privilege. | | LabAdmin | If TRUE, then the user has access to the Hands-on Lab administration pages. | | OtherTeleConferencing | Indicates whether a user account has the privilege to schedule a session with the **other teleconferencing** feature enabled. Default value depends on the configurations on the user's website. | | TeleConferenceCallInInternational | Allows a user to access Webex Meetings teleconferencing through international local call-in telephone numbers. | | AttendeeOnly | If the value is TRUE, indicates that the user's role is attendee only. If the value is set to TRUE, then the **host**, **siteAdmin**, **labAdmin**, and **roSiteAdmin** elements should be FALSE. | | RecordingEditor | Indicates whether a user has the privilege to download the Webex Meetings Recording Editor from My Webex \> Support. | | MeetingAssist | Enables Meeting Assist. | | MeetingType | The meeting types of which the account is a part of. | ## Default Entitlement Attributes Entitlement attributes define the entitlements, such as groups or roles, that can be assigned to the managed system's user accounts. Refer to [Managing Entitlements]() for more information. > [!CAUTION] > > Changing the attribute marked as the Entitlement ID after aggregating accounts or entitlements can result in duplicate entitlements being created, or access profiles and roles breaking. To avoid this, edit the entitlement schema before performing any aggregations. ### Default Group Attributes The Webex Meetings connector also supports groups. The following attributes must be configured on the managed system and in the SailPoint source schema to manage groups. | Attribute Name | Description | | --- | --- | | ProductCodePrefix | Indicates the product label for the type of meeting. | | Active | Indicates whether the type of meeting represented by an object of this type is enabled or disabled. | | DisplayName | The display name for the meeting type. | | PrimaryTollCallInNumber | The telephone number for a toll call-in teleconference. | | PrimaryTollFreeCallInNumber | The telephone number for a toll free call-in teleconference. | | GroupName | The name of the group or meeting type. | | MeetingTypeID | Specifies IDs for the meeting types whose detailed information you want to get. | | ServiceType | The type of meeting being returned. | # Enable Connector Logging This topic provides the steps needed to enable logging on SailPoint using REST APIs. > [!NOTE] > > This topic only applies to VA-based integrations. > [!NOTE] > > The examples provided might not match your configuration. Use the logging levels and logging classes reference at the bottom of the topic to configure your API responses to match your connector. This process is broken up into four steps: 1. Identify the Virtual Appliance (VA) cluster on which you want to enable logging. 2. Get the logging configuration for the existing VA cluster. 3. Update the VA cluster to enable logging levels. 4. Observe logging changes to the logging levels. ### Identify the Virtual Appliance Cluster Select the VA on which you need to enable logging using REST API. If you already know the VA application's `id`, proceed to [Get the Logging Configuration](<#get-the-logging-configuration>). 1. Make the following call to the REST API to return a list of available VA clusters: GET /v3/managed-clusters The REST API returns a response that looks similar to the following: ```json [ { "id": "2c9180866166b5b0016167c32ef31a66", "name": "Development Cluster", "description": "Development Cluster", "clientType": "CCG", "ccgVersion": "373_535_70.2.0", "pinnedConfig": true, "logConfiguration": null }, { "id": "2c9180846a93ce60016ab29f039944de", "name": "Cloud Cluster", "description": "Cloud Cluster", "clientType": "CCG", "ccgVersion": "373_535_70.2.0", "pinnedConfig": true, "logConfiguration": { "clientId": null, "durationMinutes": 60, "expiration": "2020-12-15T19:13:36.079Z", "rootLevel": "DEBUG", "logLevels": { "sailpoint.connector.ADLDAPConnector": "DEBUG" } } } ] ``` > **Note** > > The previous example code shows two VA clusters. One VA cluster has a log configuration and the other does not (refer to the `logConfiguration` value in each returned VA cluster). This is because one of the clusters already has logging enabled. This is just an example configuration, and your environment may not have logging enabled on a cluster. 2. Identify the VA cluster that you want to enable logging on by its name or description and record its `id` attribute. ### Get the Logging Configuration Get your selected VA's cluster logging configuration and identify the values you need to update. 1. Make the following call to the REST API to return the VA cluster's logging configuration. Replace `{id}` with the VA cluster's `id` attribute value recorded earlier. GET /v3/managed-clusters/{id}/log-config - If the VA doesn't have a logging configuration currently set, it returns `204 No Content` as a response. - If the VA has an existing logging configuration, it returns something similar to the following: ```json { "clientId": null, "durationMinutes": 60, "expiration": "2020-12-15T19:13:36.079Z", "rootLevel": "DEBUG", "logLevels": { "sailpoint.connector.ADLDAPConnector": "DEBUG" } } ``` You'll need to configure the following information in the response: - `durationMinutes` is the number of minutes logging should remain enabled. - `rootLevel` is the default level for all logs. For more information, refer to [Logging Levels](<#logging-levels>). - `logLevels` is a map object with logging classes as keys and logging levels as values. - For keys, refer to [Logging Classes](<#logging-classes>) for commonly used logging classes. - For a list of available values, refer to [Logging Levels](<#logging-levels>). ### Update Logging Configuration Update the VA cluster configuration returned by the REST API to update the logging settings as needed. 1. Make the following call to the REST API to update the VA cluster's logging configuration. Replace `{id}` with the VA cluster's `id` attribute value recorded earlier. PUT /v3/managed-clusters/{id}/log-config 2. Submit your configuration changes to the REST API in a JSON body. - If the VA cluster did not already have a logging configuration and you received a `204 No Content` response, you can create a new one. - If the VA returned a configuration, you can edit it to include the changes. The JSON body should be as follows: ```json { "durationMinutes": 60, "rootLevel": "DEBUG", "logLevels": { "sailpoint.connector.ADLDAPConnector": "DEBUG" } } ``` Consider the following as you edit the JSON: - `durationMinutes` is the number of minutes logging should remain enabled. - `rootLevel` is the default level for all logs. For more information, refer to [Logging Levels](<#logging-levels>). - `logLevels` is a map object with logging classes as keys and logging levels as values. - For keys, refer to [Logging Classes](<#logging-classes>) for commonly used logging classes. - For a list of available values, refer to [Logging Levels](<#logging-levels>). If the update was successful, the REST API should return a response similar to the following: ```json { "clientId": null, "durationMinutes": 60, "expiration": "2020-12-15T19:13:36.079Z", "rootLevel": "DEBUG", "logLevels": { "sailpoint.connector.ADLDAPConnector": "DEBUG" } } ``` ### Observe Logging Changes Approximately five minutes after you update the configuration, the VA cluster starts generating log files you can review. You can view the log files in **ccg.log**. ### References The tables in this reference section list information that can be helpful when creating the JSON body you'll use to configure the VA cluster's configuration file. #### Logging Levels | Logging Level | Description | | --- | --- | | ERROR | Designates error events that might still allow the connector to continue. | | WARN | Designates potentially harmful situations. | | INFO | Designates information messages that highlight process at a coarse-grain level. | | DEBUG | Very verbose. Fine grain logging levels used for development and debugging. | | TRACE | Most verbose. Finer grain logging levels than debugging. | #### Logging Classes | Connector | Logging Class | | --- | --- | | Active Directory | sailpoint.connector.ADLDAPConnector sailpoint.connector.LDAPConnector | | AIX | openconnector.connector.unix.AIXConnector openconnector.connector.unix.UnixConnector | | Amazon Web Services | logger.aws.name=openconnector.connector.aws logger.aws.level=trace logger.aws.additivity = false logger.aws.appenderRef.rolling.ref = STDOUT | | Atlassian Suite Cloud | sailpoint.connector.OpenConnectorAdapter openconnector.connector.atlassian.AtlassianConnector | | Atlassian Data Center | sailpoint.connector.OpenConnectorAdapter openconnector.connector.atlassian.AtlassianDataCenterConnector | | Microsoft Entra ID | sailpoint.connector.AzureADConnector | | Box | openconnector.connector.BoxNetConnector sailpoint.connector.OpenConnectorAdapter | | Cerner | openconnector.connector.CernerConnector sailpoint.connector.OpenConnectorAdapter | | Delimited File | logger.DelimitedFileConnector.name = sailpoint.connector.DelimitedFileConnector logger.DelimitedFileConnector.level = debug logger.DelimitedFileConnector.additivity = false logger.DelimitedFileConnector.appenderRef.rolling.ref = STDOUT | | Dropbox | openconnector.connector.DropBoxConnector sailpoint.connector.OpenConnectorAdapter | | Epic | openconnector.connector.EPICConnector sailpoint.connector.OpenConnectorAdapter | | GE Centricity | openconnector.connector.GECentricity sailpoint.connector.OpenConnectorAdapter | | Google Apps / G Suite | openconnector.connector.GoogleAppsDirect sailpoint.connector.OpenConnectorAdapter | | IBM i | openconnector.connector.IBMiConnector | | Lotus Domino | sailpoint.connector.LotusDomino | | JDBC | sailpoint.connector.JDBCConnector | | Sun One LDAP | sailpoint.connector.LDAPConnector | | Linux | openconnector.connector.unix.LinuxConnector sailpoint.connector.OpenConnectorAdapter sailpoint.connector.UnixConnector | | Microsoft Office365 | sailpoint.connector.Office365Connector | | Microsoft SQL Server | sailpoint.connector.mssql.serviceimpl.MSSQLServerConnectorV2 | | Okta | logger.openconnector.name = openconnector.connector.okta.OktaConnector logger.openconnector.level = debug logger.openconnector.additivity = false logger.openconnector.appenderRef.rolling.ref = STDOUT | | Oracle Database | sailpoint.connector.OracleDBConnector sailpoint.connector.JDBCConnector | | Oracle E-Business | sailpoint.connector.OracleEBSConnector sailpoint.connector.JDBCConnector | | Oracle Fusion HCM | openconnector.connector.oraclefusionhcm.OracleFusionHCMConnector sailpoint.connector.OpenConnectorAdapter | | Oracle HCM Cloud | sailpoint.connector.oraclehcmcloud.OracleHCMCloudConnector | | Oracle HRMS | sailpoint.connector.OracleAppsHRMSConnector sailpoint.connector.JDBCConnector | | Oracle Netsuite | openconnector.connector.netsuite.NetsuiteConnector | | PeopleSoft ERP | openconnector.connector.PeopleSoftConnector sailpoint.connector.OpenConnectorAdapter | | PeopleSoft HRMS | sailpoint.connector.PeopleSoftHRMSConnector | | RemedyForce | sailpoint.connector.ForceConnector | | RSA Authentication Manager | openconnector.connector.RSAConnector openconnector.connector.rsa.RSAHTTPClient sailpoint.connector.OpenConnectorAdapter | | Salesforce | sailpoint.connector.ForceConnector | | SAP Concur | openconnector.connector.sapconcur.SAPConcurConnector | | SAP - Direct | sailpoint.connector.SAPConnector sailpoint.connector.SAPInternalConnector | | SAP GRC | logger.SAPGRCConnector.name = sailpoint.connector.sapgrc logger.SAPGRCConnector.level = debug logger.SAPGRCConnector.additivity = false logger.SAPGRCConnector.appenderRef.rolling.ref = STDOUT | | SAP HR/HCM | sailpoint.connector.SAPHRInternalConnector | | SCIM 1.1 | openconnector.connector.SCIMConnector sailpoint.connector.OpenConnectorAdapter | | SCIM 2.0 | openconnector.connector.scim2.SCIM2Connector sailpoint.connector.OpenConnectorAdapter | | ServiceNow | openconnector.connector.servicenow.ServiceNowConnector openconnector.connector.servicenow.ServiceNowRestClient sailpoint.connector.OpenConnectorAdapter | | ServiceNow Service Desk Integration | openconnector.connector.servicedesk.ServiceNowServiceDeskConnector sailpoint.connector.OpenConnectorAdapter | | Siebel | openconnector.connector.SiebelConnector sailpoint.connector.OpenConnectorAdapter | | Snowflake | openconnector.connector.snowflake.SnowflakeConnector sailpoint.connector.OpenConnectorAdapter | | Solaris | openconnector.connector.unix.SolarisConnector openconnector.connector.unix.UnixConnector sailpoint.connector.OpenConnectorAdapter | | SuccessFactors | sailpoint.connector.SuccessFactorsConnector | | Sybase | sailpoint.connector.SybaseDirectConnector sailpoint.connector.JDBCConnector | | Webex | openconnector.connector.Webex sailpoint.connector.OpenConnectorAdapter | | Workday | openconnector.connector.WorkDay sailpoint.connector.OpenConnectorAdapter | | Workday Accounts | openconnector.connector.workdayaccounts openconnector.connector.workdayaccounts.WorkdayAccountsConnector sailpoint.connector.OpenConnectorAdapter | | Web Services | sailpoint.connector.WebServices | | XML | openconnector.connector.XMLConnector sailpoint.connector.OpenConnectorAdapter | | Yammer | openconnector.connector.YammerConnector sailpoint.connector.OpenConnectorAdapter | | Zoom | openconnector.connector.zoom.ZoomConnector sailpoint.connector.OpenConnectorAdapter | # Troubleshooting If you encounter any of the following issues or errors, SailPoint recommends that you follow the guidance provided below to resolve the error before contacting SailPoint Support. For issues or errors that are not addressed in this connector guide, refer to the following resources for troubleshooting information: - [SailPoint Identity Services Documentation]() - [SailPoint Support Knowledge Base]() - [SailPoint Developer Community]() # Timeout Errors and Settings Timeout errors might occur when SailPoint is waiting for a response from the Virtual Appliance (VA). These errors are applicable to all connectors and tend to occur during the setup of sources or when sources are down. This document is designed to give specific information that can be used to resolve these errors. Each timeout attribute has a default time value that is listed in seconds or minutes. Increasing the time value may resolve the error as it will allow for longer communication time between the two systems, thus avoiding the timeout error. > [!IMPORTANT] > > Add the necessary attributes or values before performing the "replace" operation, as missing attributes will cause the operation to fail. To increase the communication time, increase the value of the appropriate timeout attribute. Then submit the change to the VA using the SailPoint REST API. > [!NOTE] > > For more information on SailPoint's REST APIs, refer to [Best Practices: REST API Authentication]() and [REST API - Update Source (Partial)]() in the SailPoint Developer Community. ### aggregateTimeout **Description:** This parameter is set for the aggregation timeout, measured in seconds. **Resolution:** Increase the `aggregateTimeout` value gradually to optimize aggregation. Start with 180, then increase to 600, 900, and finally 1800. The maximum value is 3600 seconds. For example: If your current time value is 180 seconds, update the `aggregateTimeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/aggregateTimeout", "value": 600 } ] ``` ### healthCheckTimeout **Description:** This parameter is set for the test connection and health check timeout. **Resolution:** The default value is 30 seconds. If the timeout error continues, increase the value in 15 second increments and try again. For example: If your current time value is 30 seconds, update the `healthCheckTimeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/healthCheckTimeout", "value": 45 } ] ``` ### provisioningTimeout **Description:** This parameter is set for provisioning timeout. **Resolution:** Increase the `provisioningTimeout` value gradually to optimize provisioning. Start with 180, then increase to 360, and finally 600. The maximum value is 600 seconds. For example: If your current time value is 180 seconds, update the `provisioningTimeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/provisioningTimeout", "value": 360 } ] ``` ### timeout **Description:** This parameter is set for pass-through authentication timeout. **Resolution:** The default value is 15 seconds. If the timeout error continues, increase this value in 15 second increments and try again. For example: If your current time value is 15 seconds, update the `timeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/timeout", "value": 30 } ] ``` ### apiTimeout **Description:** This parameter is set for API time tracking; customers can check it using an external tool. **Resolution:** The default value is 60 seconds. If the error continues, increase the value by 15 second increments and try again. For example: If your current time value is 60 seconds, update the `apiTimeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/apiTimeout", "value": "75" } ] ``` ### timeoutInSeconds **Description:** This parameter helps prevent the VA from waiting indefinitely for an API response, ensuring efficient handling of API requests. For example: If your current time value is 30 seconds, update the `timeoutInSeconds` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/timeoutInSeconds", "value": "15" } ] ```