# SailPoint BlazeMeter Connector Documentation

> BlazeMeter Connector Documentation

# Documentation

# Connecting SailPoint and BlazeMeter

To connect SailPoint to the source, perform the following tasks:

## Adding and Configuring the Source in SailPoint

To connect to SailPoint, perform the following steps. Once the connection is made, you can configure it to meet your company's needs.

1. Go to **Admin \> Connections \> Sources**.
2. Select **Create New**.
3. Search for a source type and select **Actions**.
4. In the **Actions** dropdown, select the setup method:

   - **Express Setup** - Quickly create a read-only connection to your target system by providing minimal configurations and authentication. On completion, aggregation is automatically started.

     > **Note**
     >
     > Express Setup supports Credential Providers. For information on supported credential providers and configuration, refer to [Credential Providers](<https://documentation.sailpoint.com/connectors/help/credential_providers.html>). For more information, contact your SailPoint Customer Service Manager.
   - **Standard Setup** - Provide detailed basic configuration to create the source. Once the source is created, continue with source setup.

### Express Setup

1. Review the directions and select **Start Express Setup**.
2. Review the pre-populated source name, source owner, and description. To update, select **Edit**.

   > **Note**
   >
   > Source name must be unique.
3. (Optional) If enabled for your organization, select the **Use a Credential Provider** checkbox to manage the source's authentication using a credential provider.

   > **Note**
   >
   > To add a Credential Provider in SailPoint, go to **Admin \> Connections \> Credential Providers**. For more information about credential providers, refer to [Credential Providers](<https://documentation.sailpoint.com/connectors/help/credential_providers.html>).
4. Configure the authentication to allow SailPoint to connect to the source. For more information, refer to the **Connection Settings** page.
5. Select **Finish**. After a successful test connection, the system creates your source and prompts you to run an aggregation.

   - If you want to aggregate now, select **Aggregate**.

     - To see the latest account aggregation history, go to **Account Management \> Account Aggregation**.
     - To see the list of aggregated source accounts, go to **Account Management \> Accounts**.
   - If you want to aggregate later, select **Exit**. This returns you to the **Sources** page. Your new source is listed, but contains no accounts or aggregation history yet.

### Standard Setup

Configure more detailed settings relative to Express Setup.

1. In the **Source Name** field, enter a unique and descriptive name for your source. Source names cannot exceed 128 characters.
2. In the **Description** field, provide additional details about the source to help distinguish it from similar sources. This field allows a maximum of 2,000 characters.
3. In the **Source Owner** field, begin typing the name of an owner. Matches appear after you type two or more letters. For more information, refer to [Assigning a Source Owner](<https://documentation.sailpoint.com/saas/help/sources/index.html#assigning-a-source-owner>).
4. (Optional) Select a governance group to grant its members [source](<https://documentation.sailpoint.com/saas/help/common/users/user_levels.html#source-sub-admin-user-level>) or [role](<https://documentation.sailpoint.com/saas/help/common/users/user_levels.html#role-sub-admin-user-level>) sub-admin level oversight of the source and its access. For more information, refer to [Creating and Managing Governance Groups](<https://documentation.sailpoint.com/saas/help/common/users/governance_groups.html>).
5. If this source represents a primary system containing your organization's personnel records, select the **Authoritative Source** checkbox. For more information, refer to [Creating Identity Profiles](<https://documentation.sailpoint.com/saas/help/setup/identity_profiles.html>).
6. Select **Continue**. The source is created, and you are navigated to the **Source Setup \> Base Configuration** page. Here, continue to configure your connected source.

## Base Configuration

Provide the base configuration parameters. Information you entered in the Create New Source dialog is automatically entered into the fields in the Base Configuration page. You can edit this information if necessary.

1. Enter a descriptive **Source Name** for the connection.
2. Enter the **Source Description** that provides details necessary to distinguish it from similar connection sources.
3. In **Source Owner**, begin typing the name of the source owner.
4. (Optional) Select the appropriate **Governance Group for Source Management** from the dropdown list. For more information about governance groups, refer to [Associating Governance Groups with a Source](<https://documentation.sailpoint.com/saas/help/common/users/governance_groups.html#associating-a-governance-group-with-a-source>).
5. Select **Create Manual Work Items** to enable the source to support additional source management features such as creating accounts and access profile management.

   > **Important**
   >
   > Once you enable this feature, it can't be disabled.

   For more information on manual work items, refer to [Work Items](<https://developer.sailpoint.com/docs/api/work-items>). For more information on SailPoint features, refer to [SailPoint Identity Services](<https://documentation.sailpoint.com/saas/help/index.html>).
6. Select **Save**.

## Connection Settings

Configure a secured, direct connection to the source.

1. Enter the BlazeMeter API v4 base endpoint as **Base URL**. For example, `https://a.blazemeter.com/api/v4`.
2. Enter the BlazeMeter account id from the application URL as **Account ID**. For example, `2201704`.
3. Enter the API key id as **API Key ID**. The connector sends it as the Basic authentication username.
4. Enter the API key secret as **API Key Secret**. The connector sends it as the Basic authentication password. Treat this as a secret.
5. Select **Save**.

## Review and Test

Perform a test to confirm the connection to SailPoint.

1. Go to **Review and Test**.
2. Confirm that the entries in each field are correct.

   If you note any mistakes, return to the section and make corrections.
3. Select **Test Connection**.

## SailPoint Application Onboarding

SailPoint application onboarding enables you to easily onboard new applications and create sources following the successful onboarding of a discovery source. To use this feature, continue to **Discovered Applications** in the SailPoint user interface.

For more information, refer to [Application Onboarding](<https://documentation.sailpoint.com/saas/help/ai/app_onboarding/index.html>) in the SailPoint SaaS documentation.

# Dataset Management

Dataset Management lets you review the object types a source collects and control how the source aggregates those objects into SailPoint. Use Dataset Management to view and manage resource attributes, datasets and their resources, enable dataset aggregation schedules, perform manual aggregation, and view aggregation history.

> [!NOTE]
>
> Datasets are also available in SailPoint Agentic Fabric. Contact your Customer Success team and refer to [SailPoint Agentic Fabric](<https://documentation.sailpoint.com/saas/help/agentic_fabric/index.html>) for more information.

For more information, refer to [Managing Datasets and Resources](<https://documentation.sailpoint.com/saas/help/sources/datasets.html>) for datasets, resources, owner correlation, and aggregation.

## Datasets

A *dataset* is a named group of one or more related resources that the source aggregates together.

When aggregation runs for a dataset, the source collects all resources in that dataset from the managed system in one aggregation job. Activate or deactivate aggregation at the dataset level, not for individual resources.

> [!NOTE]
>
> Each resource belongs to exactly one dataset for that source. The source defines which resources belong to each dataset. You can enable aggregation and review associated resources, but you cannot create or delete datasets or move resources between them.

### Dataset Aggregation

Configure aggregation on the **Dataset Aggregations** tab for each dataset. Configure each dataset separately. During aggregation, your owner correlation rules are automatically applied to link machine identities to their human owners. For more information, refer to [Configuring Dataset Aggregations](<https://documentation.sailpoint.com/saas/help/sources/datasets.html#configuring-dataset-aggregations>).

## Resources

A resource defines an object type from the managed system. It specifies the kind of object, the attributes the source collects, and how the source identifies and displays each object. Resources form the building blocks of the data model.

In the UI, each resource appears under **Dataset Management** \> **Resources** with its schema. A resource does not run aggregation by itself. The dataset that owns the resource collects it during aggregation.

For more information, refer to [Managing Resources](<https://documentation.sailpoint.com/saas/help/sources/datasets.html#managing-resources>).

### Owner Correlation

Configure owner correlation on each resource to link aggregated objects to human owners. If you do not configure owner correlation, or if the mapping produces no match, an owner is not assigned. For more information, refer to [Configuring Owner Correlation](<https://documentation.sailpoint.com/saas/help/sources/datasets.html#configuring-owner-correlation>).

## Supported Datasets

Go to **Dataset Management \> Datasets** on your BlazeMeter source to view the datasets the connector aggregates. Select a dataset to review its associated resources and configure aggregation.

> [!NOTE]
>
> Configure aggregation for each dataset separately. For more information, refer to [Dataset Aggregation](<https://documentation.sailpoint.com/saas/help/sources/datasets.html#configuring-dataset-aggregations>).

| Dataset name | Associated resources | Dataset ID | Aggregation schedule |
| --- | --- | --- | --- |
| **Test Schedule** | Test Schedule | `blazemeter:test-schedule` | Every 12 hours (`0 */12 * * *`) |

For resource schema attributes, refer to [Supported Resources](<#supported-resources>) and [Test Schedule Attributes](<#test-schedule-attributes>).

### Dataset Aggregations

Dataset aggregation collects resource objects from the managed system and loads them into SailPoint. Repeat the configuration for each dataset on the source.

### Configuring Dataset Aggregation

To configure dataset aggregation for a dataset:

1. Go to **Admin \> Connections \> Sources**, and open your source.
2. Go to **Dataset Management \> Datasets**.
3. Select the dataset you want to configure.
4. Select the **Dataset Aggregations** tab.

   On the **Dataset Aggregations** tab, configure how resource objects from the selected dataset are aggregated into SailPoint. The tab contains **Scheduled Aggregations**, **Manual Aggregation**, and **Latest Aggregation**.

#### Scheduled Aggregations

Scheduled aggregations run on a schedule to keep the dataset synchronized with the managed system.

1. On the **Dataset Aggregations** tab, select **Enable Schedule** to turn on scheduled aggregations.

When scheduled aggregations are enabled, SailPoint aggregates all resource objects in the dataset on the configured schedule.

#### Manual Aggregation

Manual aggregation runs once and collects all resource objects in the dataset.

1. On the **Dataset Aggregations** tab, select **Start Aggregation**.

SailPoint starts the aggregation immediately. When the run completes, results appear in the **Latest Aggregation** section.

#### Viewing Aggregation Results

After an aggregation completes, review its status in the **Latest Aggregation** section on the **Dataset Aggregations** tab.

The **Latest Aggregation** section shows:

- **Start Time** - when the aggregation started
- **Resource Objects Scanned** - the number of resource objects the aggregation processed
- **Status** - whether the aggregation succeeded or failed

Select **Details** to view additional information about the most recent run. To view prior runs, select **Aggregation History**.

## Supported Resources

For more information, refer to [Managing Resources](<https://documentation.sailpoint.com/saas/help/sources/datasets.html#managing-resources>).

> [!NOTE]
>
> When you enable dataset aggregation for a selected dataset, all resources in that dataset are collected at once. Activate or deactivate aggregation at the dataset level, not for individual resources.

Under **Dataset Management** \> **Resources**, the BlazeMeter source lists each object type that is aggregated. Select a resource to review its schema on the **Schema** tab.

> [!NOTE]
>
> Test schedules are aggregated as application resources and are not included in user account aggregation.

| Resource name | Resource type | Resource ID | Identity attribute | Display attribute |
| --- | --- | --- | --- | --- |
| **Test Schedule** | `std:application` | `blazemeter:test-schedule` | `id` | `cron` |

For the complete resource schema, refer to [Test Schedule Attributes](<#test-schedule-attributes>).

### Owner Correlation

On the **Owner Correlation** tab for the Test Schedule resource, map the schedule to the identity that owns it. Match the schedule `createdById` attribute to the user account `id`. Use the matched user's `email` to correlate to the SailPoint identity. Do not use `lastUpdatedById` for owner correlation. For more information, refer to [Owner Correlation](<https://documentation.sailpoint.com/saas/help/sources/datasets.html#configuring-owner-correlation>).

## Test Schedule Attributes

Use the following schema attributes for the **Test Schedule** resource in the **Test Schedule** dataset.

> [!NOTE]
>
> Use `createdById` for owner correlation. Match it to the user account `id`, then use that user's `email` to correlate to the SailPoint identity. Do not use `lastUpdatedById` for owner correlation.

| Attribute Name | Description |
| --- | --- |
| id | Unique identifier of the test schedule. Resource ID. Required. |
| cron | Cron expression defining when the scheduled test runs. Resource name and display attribute. Required. |
| enabled | Whether the schedule is enabled and can trigger test runs. Required. |
| type | Schedule execution type, such as testRun. Required. |
| nextRun | Next scheduled execution time as a Unix epoch timestamp in seconds. |
| isPrivateCloud | Whether the schedule belongs to a BlazeMeter Private Cloud deployment. |
| created | Schedule creation time as a Unix epoch timestamp in seconds. |
| updated | Last schedule update time as a Unix epoch timestamp in seconds. |
| testId | Identifier of the test executed by this schedule. Present for a single test. |
| testCollectionId | Identifier of the multi-test executed by this schedule. Present instead of testId for a multi-test. |
| createdById | Identifier of the human user who created the schedule. Owner correlation attribute. Match it to the user id. |
| lastUpdatedById | Identifier of the human user who last updated the schedule. Not the owner. |
| firstFailureDate | Time of the schedule's first recorded execution failure as a Unix epoch timestamp in seconds. |

# Integrating SailPoint with BlazeMeter

BlazeMeter is a performance and functional testing platform. Teams use it to create tests, run them from an account, and start those tests on a schedule. Access to the API is granted with an API key. The account id is the top-level container: every workspace, project, and test in that account belongs to it. This document covers how to configure a new direct connection between SailPoint and BlazeMeter for Quick Compliance. For a reference to the terminology specific to SailPoint products, refer to [Source and Connector Definitions](<https://documentation.sailpoint.com/saas/help/sources/index.html#source-and-connector-definitions>).

> [!NOTE]
>
> To view the latest features, enhancements, and fixes for all SaaS connectors, refer to the [SaaS Release Notes](<https://community.sailpoint.com/release-notes/saas>) page.

## Supported Features

The BlazeMeter connector supports the following:

### Account Management

- Aggregate Users

### Non-Human Identity Discovery

- Aggregate Test Schedules

A BlazeMeter test schedule is a stored cron job that starts a test without a person logged in. The connector aggregates test schedules as application resources from their own endpoint. Test schedules are not part of user account aggregation.

> [!NOTE]
>
> This connector is read-only. It supports test connection, account aggregation, and dataset aggregation for Quick Compliance. Provisioning, de-provisioning, and write operations are not supported. Roles on the account are multi-valued account attributes. Separate entitlement aggregation is not required.

> [!IMPORTANT]
>
> Quick Compliance connectors have the following manual aggregation limits within a 24-hour period:
>
> - **Organization Admins**: Limited to 3 manual account or entitlement aggregations per day per source. This limit is cumulative across all admins in the organization.
> - **Regular Users**: Limited to 1 manual account or entitlement aggregation per day per source.
>
> These limits ensure that individual compliance statuses are kept up to date while maintaining continuous compliance monitoring. If you need to run additional aggregations beyond these limits, contact SailPoint Support.

## Prerequisites

Before you configure the BlazeMeter connector, ensure the following requirements are met:

1. Sign in to [BlazeMeter](<https://a.blazemeter.com/>).
2. Go to **Settings \> Personal \> API Keys** and create an API key. BlazeMeter shows the secret only once. Store the secret securely.
3. Copy the account id from the BlazeMeter URL. It is the number after `accounts/`. For example, in `https://a.blazemeter.com/app/#/accounts/2201704/...`, the account id is `2201704`.
4. Record the following values for connector configuration:

   - **Base URL**
   - **Account ID**
   - **API Key ID**
   - **API Key Secret**

For more information about the BlazeMeter API, refer to the [BlazeMeter API](<https://help.blazemeter.com/apidocs/>) documentation.

> [!NOTE]
>
> The linked document is not maintained by SailPoint and is subject to change without notice.

## Required Permissions

The connector authenticates with a BlazeMeter API key. The key id is the username and the key secret is the password. The connector sends them as Authorization: Basic credentials. The key must be able to list users and schedules for the account.

With that API key, the connector can:

- List users in the account, including enabled and disabled users.
- List every test schedule in the account, across every workspace, project, and test.

# Schema Reference

The application schema is used to configure the objects returned from a connector.

> [!NOTE]
>
> - The **Account Schema** tab is used to define the attributes for each object type in the application being configured. The schema attributes can be defined as **Entitlement** or **Multi-Valued**. Refer to [Managing Source Account Schemas](<https://documentation.sailpoint.com/saas/help/accounts/schema.html>) for more information.
> - The schema attributes that are not present by [default](<#default-account-schema>) must be defined as strings if not specified.

The BlazeMeter connector uses the following default correlation and object configurations.

## Default Account Schema

Each source supports a variety of details, or attributes, about each user who has an account, such as their name, email address, manager name, and location.

The set of account attributes each source stores and how they're organized is known as the account's *schema*. To best represent your data, you can configure sources to use an account schema matching the one you use in the external connector. Refer to [Managing Source Account Schemas](<https://documentation.sailpoint.com/saas/help/accounts/schema.html>) for more information.

### Default Account ID

SailPoint requires that certain attributes remain in your configuration. These attributes are referred to as *account IDs*.

> [!CAUTION]
>
> Changing the attribute marked as the account ID after aggregating accounts can result in duplicate accounts being created. To avoid this, either reset the accounts on this source before editing the account ID attribute or edit the account ID attribute before aggregating accounts.
>
> To resolve issues caused by changing account IDs, reconfigure them to their default values.

The following table lists the default account IDs for this connector:

| Account ID | Schema Object Type | Display Attribute | Correlation Attribute |
| --- | --- | --- | --- |
| id | Account | email | Unique email of the user. |

### Default Account Attributes

The BlazeMeter connector supports the following default account schema attributes and customer configurable attributes. The attributes must be defined as strings if not specified.

| Attribute Name | Description |
| --- | --- |
| id | Unique ID of the user. Account ID. This is the value matched to a test schedule's createdById. |
| email | Unique email of the user. Account Name and correlation attribute. |
| displayName | Display name of the user. |
| firstName | First name of the user. |
| lastName | Last name of the user. |
| roles | Account roles assigned to the user. Multi-valued. |
| enabled | Whether the user is enabled in the account. |
| login | Last login time as a Unix epoch timestamp in seconds. |
| access | Last access time as a Unix epoch timestamp in seconds. |
| lastAccess | Last access time as a Unix epoch timestamp in seconds. |