# SailPoint MEDITECH Connector Documentation > MEDITECH Connector Documentation # Documentation # Connecting SailPoint and MEDITECH To connect SailPoint with MEDITECH, perform the following tasks: ## Adding the Source in SailPoint To connect to SailPoint, perform the following steps. Once the connection is made, you can configure it to meet your company's needs. > [!IMPORTANT] > > By default, the provisioning feature is **disabled**, and the connector only supports read-only operations. To support provisioning operations, you must manually enable the feature in the source configuration. **To configure a new source:** 1. Sign in to SailPoint. 2. Go to **Admin \> Connections \> Sources**. 3. Select **Create New**. 4. Search for the connector by entering the name in the search box, and then select **Actions**. 5. In the **Actions** dropdown list, select the setup method: - [**Express Setup**](<#configuring-a-source-using-express-setup>) - Quickly create a read-only connection to your target system by providing minimal configurations and authentication. On completion, aggregation is automatically started. > **Note** > > Express Setup supports Credential Providers. For information on supported credential providers and configuration, refer to [Credential Providers](). For more information, contact your SailPoint Customer Service Manager. - [**Standard Setup**](<#configuring-a-source-using-standard-setup>) - Provide detailed basic configuration to create the source. Once the source is created, continue with source setup. ### Configuring a Source Using Express Setup Express Setup minimizes the initial configuration process so you can quickly connect the application and immediately begin aggregating user account and entitlement data. 1. Review the directions and select **Start Express Setup**. 2. Review the pre-populated **Source Name**, **Source Owner**, and **Description**. To update, select **Edit**. > **Note** > > The source name must be unique. You can change these settings later in the source configuration. 3. Select **Virtual Appliance**. A virtual appliance is a Linux-based virtual machine that connects to your sources and apps using SailPoint APIs, connectors, and integrations. For more information about configuring and deploying virtual appliances, refer to [SailPoint Virtual Appliances](). 4. (Optional) If enabled for your organization, select the **Use a Credential Provider** checkbox to manage the source's authentication using a credential provider. > **Note** > > To add a Credential Provider in SailPoint, go to **Admin \> Connections \> Credential Providers**. For more information about credential providers, refer to [Credential Providers](). 5. Configure the authentication to allow SailPoint to connect to the source. For more information, refer to the **Connection Settings** section. 6. Select **Finish**. After a successful test connection, the system creates your source and prompts you to run an aggregation. - If you want to aggregate now, select **Aggregate**. - To see the latest account aggregation history, go to **Account Management \> Account Aggregation**. - To see the list of aggregated source accounts, go to **Account Management \> Accounts**. - If you want to aggregate later, select **Exit**. This returns you to the **Sources** page. Your new source is listed, but contains no accounts or aggregation history yet. ### Configuring a Source Using Standard Setup Use Standard Setup to configure the connector for full feature support. 1. In the **Source Name** field, enter a unique and descriptive name for your source. Source names cannot exceed 128 characters. 2. In the **Description** field, provide additional details about the source to help distinguish it from similar sources. This field allows a maximum of 2,000 characters. 3. In the **Source Owner** field, begin typing the name of an owner. Matches appear after you type two or more letters. For more information, refer to [Assigning a Source Owner](). 4. Under **Connection Type**, select **Direct Connection** or **Flat File**. - **Direct Connection** - A direct connection fetches data from the **Virtual Appliance Cluster** you choose as the application connector for the source. A direct connection configuration allows for real-time updates. For more information about configuring and deploying virtual appliances, refer to the [Virtual Appliance Reference Guide](). - **Flat File** - Select the flat file if no connector is available, or if another system restricts the connection. This option allows only reading and aggregating data as a generic/delimited application. Provisioning activity is unsupported, and additional configuration pages like connection settings and aggregation settings are unavailable. 5. If you selected **Direct Connection**, in **Virtual Appliance Cluster**, select the virtual appliance cluster that will be used as the application connector for the source. 6. (Optional) Select a governance group to grant its members [source]() or [role]() sub-admin level oversight of the source and its access. For more information, refer to [Creating and Managing Governance Groups](). 7. If this source represents a primary system containing your organization's personnel records, select the **Authoritative Source** checkbox. For more information, refer to [Creating Identity Profiles](). 8. Select **Continue**. The source is created, and you are navigated to the **Source Setup \> Base Configuration** page. Continue to configure your connected source there. ## Base Configuration Provide the base configuration parameters. Information you entered in the Create New Source dialog is automatically entered into the fields in the Base Configuration page. You can edit this information if necessary. 1. Enter a unique name and description for the source. 2. In the **Source Owner** dropdown list, select the identity that owns this source. - To find a source owner, begin entering their name. 3. In the **Virtual Appliance Cluster** dropdown list, select the virtual appliance to use when communicating with your organization's systems. For more information, refer to [SailPoint Virtual Appliances](). 4. (Optional) If enabled for your organization, select the **Use a Credential Provider** checkbox to manage the source's authentication using a credential provider. > **Note** > > To add a credential provider, go to **Admin \> Connections \> Credential Providers**. For more information about credential providers, refer to [Credential Providers](). 5. Configure the authentication to allow SailPoint to connect to the source. Refer to [Connection Settings](<#connection-settings>) for more information. 6. (Optional) In the **Governance Group for Source Management** dropdown list, select a governance group to associate with this source. For more information about governance groups, refer to [Associating Governance Groups with a Source](). 7. (Optional) Choose whether to enable or disable provisioning for the source. Provisioning is disabled by default. - **Enable Provisioning** - Set the toggle to **Enabled** to allow the source to create, update, and deactivate accounts in the connected source system. - **Disable Provisioning** - Set the toggle to **Disabled** to disable provisioning for the source. Disabling provisioning will prevent the creation, updating, or deactivating of accounts on this source. 8. Select **Save**. ## Connection Settings Provide the information required to connect to the MEDITECH instance and who can access the information. OAuth2 with Client Credentials is the supported authentication and grant types. > [!NOTE] > > **Screenshot** > > [![Connection Settings]()]() 1. In the **Host URL** field, enter the fully qualified URL of the MEDITECH instance. 2. In the **Scope** field, enter the scopes to include when creating a token on MEDITECH. Multiple scopes can be included as space separated values. For example, you can use: ```text meditech.users.read&meditech.users.manage&meditech.groups.read&meditech.groups.manage&meditech.schemas.read&meditech.roles.read.manage ``` 3. Enter the **Token URL** for token generation. For example: ```text https://{yourmeditechDomain}/oauth2/v1/token ---> https://{yourmeditechDomain}/oauth2/token ``` 4. In the **Client ID** and **Client Secret** fields, enter the values for OAuth2 authentication. This information is available in MEDITECH. 5. Select **Save**. ## Aggregation Settings On the Additional Settings page, configure the aggregation parameters such as filter and page size. Use a semicolon delimiter to add multiple filter conditions. For more information about aggregation, refer to [Loading Account Data](). > [!NOTE] > > **Screenshot** > > [![Aggregation Settings]()]() 1. Type or paste the **Account Filter Query String** to filter accounts during aggregation. Only strings are supported as a filter condition. For multiple conditions, use a semicolon delimiter. 2. In the **Page Size** field, enter the number of records per page: - Default: 100 - Minimum: 1 - Maximum: 100 3. Select **Save**. ### Advanced Settings In the **Aggregation Settings \> Advanced Settings** section, you can provide settings for Thread Count and Connection Timeout. > [!NOTE] > > SailPoint recommends that you do not change the default settings. Changing the settings could result in performance issues. > [!NOTE] > > **Screenshot** > > [![Advanced Settings]()]() 1. Select the toggle to enable/disable **Delta Aggregation Mode**. When delta aggregation is enabled, only accounts that have changed since the last aggregation are loaded. A delta aggregation typically takes less time and fewer system resources than a full aggregation. 2. Select toggle to enable/disable **Partition Aggregation Mode**. When partition aggregation is enabled, account aggregation is performed with the filters specified in **Account Filter Query String**. Only accounts that match the filter are aggregated. The following parameters can be used in the Account Filter field to filter by account attributes. To include multiple conditions in the filter, separate them with an ampersand (`&`): > **`active`** > > `true`, `false`, `all` > > When set, this filters based on `active` status. Example: > > ```text > active=true&isProv=false > ``` > > returns all accounts with an active status. > **`isProv`** > > `true`, `false` > > This filters by the provider status for MisPerson. For example: > > ```text > isProv=true > ``` > > returns all accounts that have a provider status. > **`provFacilities`** > > Provide a comma separated list of `MisFacility` values. This filters accounts by providers at the specified facilities. This parameter requires `isProve=true`. For example: > > ```text > isProve=true&provFacilities=MisFacility1, MisFacility2 > ``` > > returns provider accounts at MisFacility1 and MisFacility2. > **`provGroups`** > > Provide a comma separated list of MisProviderGroup values. When set this filters providers based on the specified groups. This parameter requires `isProve=true`. For example: > > ```text > isProv=true&provGroups=nurse_general,physician_oncology > ``` > > returns providers in the nurse\_general and physician\_oncology groups. 3. Enter the **Partition Count**. This specifies the number of items in each partition group. 4. In **Aggregation Timeout (in seconds)**, specify the time span after which the aggregation operation is stopped. 5. Specify in seconds the time to wait before the **Connection Timeout**. 6. In the **Retry Error List**, specify the errors to retry during aggregation. Begin typing the error type and click enter to add the type to the list. The list of errors to retry appears below the field. 7. Select **Save**. ## Review and Test Perform a test to confirm the connection to SailPoint. 1. Go to **Review and Test**. 2. Confirm that the entries in each field are correct. If you note any mistakes, return to the section and make corrections. 3. Select **Test Connection**. ## SailPoint Application Onboarding SailPoint application onboarding enables you to easily onboard new applications and create sources following the successful onboarding of a discovery source. To use this feature, continue to **Discovered Applications** in the SailPoint user interface. For more information, refer to [Application Onboarding]() in the SailPoint SaaS documentation. # Integrating SailPoint with MEDITECH > [!NOTE] > > **Integration** > > This is an integration and requires additional licensing or subscriptions to utilize it. For more information, contact your customer success manager. Connecting SailPoint to your MEDITECH system allows you to manage users as accounts and roles as account-groups. > [!NOTE] > > To view the latest features, enhancements, and fixes for all SaaS connectors, refer to the [SaaS Release Notes]() page. ## Supported Features MEDITECH connector supports the following features: #### Account Management Manage MEDITECH users as Account - Aggregation - Delta Aggregation - Partitioning Aggregation - Refresh Accounts - Create, Update - Enable, Disable - Add/Update Entitlements #### Entitlement Management Manage MEDITECH Roles as Account-Group - Aggregation ## Prerequisites - To enable the integration, contact your SailPoint Customer Success Manager. - Configure at least one virtual appliance cluster and successfully test the connection. For instructions, refer to the [Virtual Appliance Reference Guide](). # Machine Account Attributes ## Machine Account Provisioning Attributes The following table lists the attributes in the machine account creation template, including the type, generator, and description for each attribute. > [!IMPORTANT] > > Account attributes marked with an asterisk(\*) are mandatory attributes for machine account creation. | Attribute | Type | Description | | --- | --- | --- | | mnemonic | string | Mnemonic for the MIS record of the account | | nameFirst | string | First name of the account | | nameLast | string | Last name of the account | | active\* | boolean | Whether the account is active or not | | unvActive\* | boolean | Whether the associated universal record of the account is active | | nameMiddle | string | Middle name of the account | | nameOtherFirst | string | Other first name of the account | | nameOtherLast | string | Other last name of the account | | nameFull | string | Full name of the account | | namePrefix | string | Prefix for the name of the account | | nameSuffix | string | Suffix for the name of the account | | monogram | string | Monogram for the associated universal record of the account | | domainAccounts | string | Domain accounts of the account | | credentials | string | Credentials of the account | | isProvider | boolean | Whether the account is identified as a provider | | providerType | string | Type of provider for the account | | providerSpecialties | string | List of MIS provider specialties for the account | | createMISOnly | boolean | Whether the account is created as an MIS record only | For more information, refer to [Machine Identity Security Overview](). # Schema Reference The application schema is used to configure the objects returned from a connector. > [!NOTE] > > - The **Account Schema** tab is used to define the attributes for each object type in the application being configured. The schema attributes can be defined as **Entitlement** or **Multi-Valued**. Refer to [Managing Source Account Schemas]() for more information. > - The schema attributes that are not present by [default](<#default-account-schema>) must be defined as strings if not specified. The MEDITECH connector uses the following default correlation and object configurations. ## Default Account Schema Each source supports a variety of details, or attributes, about each user who has an account, such as their name, email address, manager name, and location. The set of account attributes each source stores and how they're organized is known as the account's *schema*. To best represent your data, you can configure sources to use an account schema matching the one you use in the external connector. Refer to [Managing Source Account Schemas]() for more information. ### Default Account ID SailPoint requires that certain attributes remain in your configuration. These attributes are referred to as *account IDs*. > [!CAUTION] > > Changing the attribute marked as the account ID after aggregating accounts can result in duplicate accounts being created. To avoid this, either reset the accounts on this source before editing the account ID attribute or edit the account ID attribute before aggregating accounts. > > To resolve issues caused by changing account IDs, reconfigure them to their default values. The following table lists the default account IDs for this connector: | Account ID | Schema Object Type | | --- | --- | | id | Account | | mnemonic | Group | ### Default Account Attributes The MEDITECH connector supports the following default account schema attributes and customer configurable attributes. The attributes must be defined as strings if not specified. | Attribute Name | Description | | --- | --- | | id | Unique Identifier of the person. | | mnemonic | Mnemonic for this MIS person record. | | monogram | Monogram for the associated universal record. | | active | Whether the person is active or not. | | nameFirst | First name of the person. | | nameMiddle | Middle name of the person. | | nameLast | Last name of the person. | | nameFull | Full name of the person. | | name\_prefix | Prefix for the name of the person. | | name\_suffix | Suffix fro the name of the person. | | nameOtherFirst | Other first name of the person. | | nameOtherLast | Other last name of the person. | | credentials | Credentials of the person. | | domainAccounts | Domain accounts of the person. | | isProvider | The person being identified as a provider or not (Read only attribute). | | providerType | Type of provider (Read only attribute). | | role | Role of the person. | | isSupervisor | Is the person being identified a supervisor or not. | | supervisorId | Identifier of the supervisor. | | lastEditedBy | The person who last edited the account. | | lastEditDateTime | Date the account was last edited. | | onStaff | Whether the person is on staff or not. | | providerSpecialties | List of MIS provider specialties. | | unvid | ID for the associated universal user record (Read only attribute). | > [!NOTE] > > If mnemonic value is not provided, the default value would be the first character of `firstName`, seven characters of `lastName`, and a two digit random value of the user. For example, for `firstName=Alfa`, `lastName=Bravo`, then the mnemonic would be `ABRAVO1E`. ## Default Entitlement Attributes Entitlement attributes define the entitlements, such as groups or roles, that can be assigned to the managed system's user accounts. Refer to [Managing Entitlements]() for more information. > [!CAUTION] > > Changing the attribute marked as the Entitlement ID after aggregating accounts or entitlements can result in duplicate entitlements being created, or access profiles and roles breaking. To avoid this, edit the entitlement schema before performing any aggregations. ### Default Role Attributes The MEDITECH connector supports roles. The following attributes must be configured on the managed system and in the SailPoint source schema to manage roles. | Attribute Name | Description | | --- | --- | | id | Unique ID of the role. | | name | Name of the role. | | mnemonic | Mnemonic for the role. | | active | Status of the role, "active" or "inactive". | # Migrate VA-based Source to a SaaS Source Some sources that are connected to virtual appliance (VA) clusters can be migrated to SaaS connections. This ensures data (users and entitlements) remain intact and can maintains your source configurations like access profiles, roles, password settings, and correlation configurations when switching from a VA cluster to a SaaS connection. To migrate a source from a VA-based source to a SaaS source, you will provide configuration details on a draft version of the source before publishing the source. > [!NOTE] > > - You must have an Admin or Source Admin user level to migrate a source. A draft version of the source is created. As your migration process is in progress the live source will continue to work as it is. For more information on the MEDITECH SaaS connector, refer to the [MEDITECH SaaS Supported Features](). ## Important Considerations Before Migrating - You do not need to edit additional configurations (other than connection credentials) to migrate the source. - If your source migration is in progress, please do not make any configuration changes to your live source as those can be overwritten once you apply the migration your draft version. - Once you've gone ahead with your migration, it can't be rolled back. Your source is permanently migrated to a SaaS source. - Any preview operations or configuration changes on the draft source will not impact the live source until you apply the migration. ## Migrating Sources To migrate your source, complete the following: 1. Go to **Admin \> Connections \> Sources**. 2. Select or edit the VA-based source you want to migrate. 3. Open the source configuration, and select **Migrate to SaaS**. 4. When prompted, select **Continue**. A draft version of the source is created. The live source will continue to work. 5. Select **Connection Settings**. 6. Re-enter encrypted configuration details. For example, you might need to re-enter the Client Secret, Password, Refresh Token, Personal Access Token (PAT), or Certificates to migrate from the VA cluster to the SaaS connection. > **Important** > > Avoid editing the other configuration options in the draft source. 7. Select **Review and Test**. 8. Select **Test Connection**. 9. (Optional) Select **Accounts**. If you successfully tested your connection in **Review and Test**, you can select **Preview** to display a subset of accounts from the application that will be mapped to SailPoint identities. This can help ensure you are accurately connecting identity data from the application with SailPoint identities. 10. (Optional) Select **Entitlements**. If you successfully tested your connection in **Review and Test** and your source type supports entitlement type configuration, you can select **Preview** to view a preview of entitlements using the current configuration settings. 11. When you've finished reviewing your changes and successfully tested your connection, select **Apply Migration**. Your changes will be applied to the live source and the draft source will be deleted. ## Viewing Source Migration Status You can view the status and creation date of draft sources. 1. Go to **Admin \> Connections \> Sources \> Source Migration Status**. 2. Select **Source Migration Status**. 3. To view or edit the draft source, select **Actions** ![]() **\> Preview** on the draft source. 4. To delete the draft source, select **Actions** ![]() **\> Delete** on the draft source. For more information on the MEDITECH SaaS connector, refer to [MEDITECH SaaS Supported Features](). # Enable Connector Logging This topic provides the steps needed to enable logging on SailPoint using REST APIs. > [!NOTE] > > This topic only applies to VA-based integrations. > [!NOTE] > > The examples provided might not match your configuration. Use the logging levels and logging classes reference at the bottom of the topic to configure your API responses to match your connector. This process is broken up into four steps: 1. Identify the Virtual Appliance (VA) cluster on which you want to enable logging. 2. Get the logging configuration for the existing VA cluster. 3. Update the VA cluster to enable logging levels. 4. Observe logging changes to the logging levels. ### Identify the Virtual Appliance Cluster Select the VA on which you need to enable logging using REST API. If you already know the VA application's `id`, proceed to [Get the Logging Configuration](<#get-the-logging-configuration>). 1. Make the following call to the REST API to return a list of available VA clusters: GET /v3/managed-clusters The REST API returns a response that looks similar to the following: ```json [ { "id": "2c9180866166b5b0016167c32ef31a66", "name": "Development Cluster", "description": "Development Cluster", "clientType": "CCG", "ccgVersion": "373_535_70.2.0", "pinnedConfig": true, "logConfiguration": null }, { "id": "2c9180846a93ce60016ab29f039944de", "name": "Cloud Cluster", "description": "Cloud Cluster", "clientType": "CCG", "ccgVersion": "373_535_70.2.0", "pinnedConfig": true, "logConfiguration": { "clientId": null, "durationMinutes": 60, "expiration": "2020-12-15T19:13:36.079Z", "rootLevel": "DEBUG", "logLevels": { "sailpoint.connector.ADLDAPConnector": "DEBUG" } } } ] ``` > **Note** > > The previous example code shows two VA clusters. One VA cluster has a log configuration and the other does not (refer to the `logConfiguration` value in each returned VA cluster). This is because one of the clusters already has logging enabled. This is just an example configuration, and your environment may not have logging enabled on a cluster. 2. Identify the VA cluster that you want to enable logging on by its name or description and record its `id` attribute. ### Get the Logging Configuration Get your selected VA's cluster logging configuration and identify the values you need to update. 1. Make the following call to the REST API to return the VA cluster's logging configuration. Replace `{id}` with the VA cluster's `id` attribute value recorded earlier. GET /v3/managed-clusters/{id}/log-config - If the VA doesn't have a logging configuration currently set, it returns `204 No Content` as a response. - If the VA has an existing logging configuration, it returns something similar to the following: ```json { "clientId": null, "durationMinutes": 60, "expiration": "2020-12-15T19:13:36.079Z", "rootLevel": "DEBUG", "logLevels": { "sailpoint.connector.ADLDAPConnector": "DEBUG" } } ``` You'll need to configure the following information in the response: - `durationMinutes` is the number of minutes logging should remain enabled. - `rootLevel` is the default level for all logs. For more information, refer to [Logging Levels](<#logging-levels>). - `logLevels` is a map object with logging classes as keys and logging levels as values. - For keys, refer to [Logging Classes](<#logging-classes>) for commonly used logging classes. - For a list of available values, refer to [Logging Levels](<#logging-levels>). ### Update Logging Configuration Update the VA cluster configuration returned by the REST API to update the logging settings as needed. 1. Make the following call to the REST API to update the VA cluster's logging configuration. Replace `{id}` with the VA cluster's `id` attribute value recorded earlier. PUT /v3/managed-clusters/{id}/log-config 2. Submit your configuration changes to the REST API in a JSON body. - If the VA cluster did not already have a logging configuration and you received a `204 No Content` response, you can create a new one. - If the VA returned a configuration, you can edit it to include the changes. The JSON body should be as follows: ```json { "durationMinutes": 60, "rootLevel": "DEBUG", "logLevels": { "sailpoint.connector.ADLDAPConnector": "DEBUG" } } ``` Consider the following as you edit the JSON: - `durationMinutes` is the number of minutes logging should remain enabled. - `rootLevel` is the default level for all logs. For more information, refer to [Logging Levels](<#logging-levels>). - `logLevels` is a map object with logging classes as keys and logging levels as values. - For keys, refer to [Logging Classes](<#logging-classes>) for commonly used logging classes. - For a list of available values, refer to [Logging Levels](<#logging-levels>). If the update was successful, the REST API should return a response similar to the following: ```json { "clientId": null, "durationMinutes": 60, "expiration": "2020-12-15T19:13:36.079Z", "rootLevel": "DEBUG", "logLevels": { "sailpoint.connector.ADLDAPConnector": "DEBUG" } } ``` ### Observe Logging Changes Approximately five minutes after you update the configuration, the VA cluster starts generating log files you can review. You can view the log files in **ccg.log**. ### References The tables in this reference section list information that can be helpful when creating the JSON body you'll use to configure the VA cluster's configuration file. #### Logging Levels | Logging Level | Description | | --- | --- | | ERROR | Designates error events that might still allow the connector to continue. | | WARN | Designates potentially harmful situations. | | INFO | Designates information messages that highlight process at a coarse-grain level. | | DEBUG | Very verbose. Fine grain logging levels used for development and debugging. | | TRACE | Most verbose. Finer grain logging levels than debugging. | #### Logging Classes | Connector | Logging Class | | --- | --- | | Active Directory | sailpoint.connector.ADLDAPConnector sailpoint.connector.LDAPConnector | | AIX | openconnector.connector.unix.AIXConnector openconnector.connector.unix.UnixConnector | | Amazon Web Services | logger.aws.name=openconnector.connector.aws logger.aws.level=trace logger.aws.additivity = false logger.aws.appenderRef.rolling.ref = STDOUT | | Atlassian Suite Cloud | sailpoint.connector.OpenConnectorAdapter openconnector.connector.atlassian.AtlassianConnector | | Atlassian Data Center | sailpoint.connector.OpenConnectorAdapter openconnector.connector.atlassian.AtlassianDataCenterConnector | | Microsoft Entra ID | sailpoint.connector.AzureADConnector | | Box | openconnector.connector.BoxNetConnector sailpoint.connector.OpenConnectorAdapter | | Cerner | openconnector.connector.CernerConnector sailpoint.connector.OpenConnectorAdapter | | Delimited File | logger.DelimitedFileConnector.name = sailpoint.connector.DelimitedFileConnector logger.DelimitedFileConnector.level = debug logger.DelimitedFileConnector.additivity = false logger.DelimitedFileConnector.appenderRef.rolling.ref = STDOUT | | Dropbox | openconnector.connector.DropBoxConnector sailpoint.connector.OpenConnectorAdapter | | Epic | openconnector.connector.EPICConnector sailpoint.connector.OpenConnectorAdapter | | GE Centricity | openconnector.connector.GECentricity sailpoint.connector.OpenConnectorAdapter | | Google Apps / G Suite | openconnector.connector.GoogleAppsDirect sailpoint.connector.OpenConnectorAdapter | | IBM i | openconnector.connector.IBMiConnector | | Lotus Domino | sailpoint.connector.LotusDomino | | JDBC | sailpoint.connector.JDBCConnector | | Sun One LDAP | sailpoint.connector.LDAPConnector | | Linux | openconnector.connector.unix.LinuxConnector sailpoint.connector.OpenConnectorAdapter sailpoint.connector.UnixConnector | | Microsoft Office365 | sailpoint.connector.Office365Connector | | Microsoft SQL Server | sailpoint.connector.mssql.serviceimpl.MSSQLServerConnectorV2 | | Okta | logger.openconnector.name = openconnector.connector.okta.OktaConnector logger.openconnector.level = debug logger.openconnector.additivity = false logger.openconnector.appenderRef.rolling.ref = STDOUT | | Oracle Database | sailpoint.connector.OracleDBConnector sailpoint.connector.JDBCConnector | | Oracle E-Business | sailpoint.connector.OracleEBSConnector sailpoint.connector.JDBCConnector | | Oracle Fusion HCM | openconnector.connector.oraclefusionhcm.OracleFusionHCMConnector sailpoint.connector.OpenConnectorAdapter | | Oracle HCM Cloud | sailpoint.connector.oraclehcmcloud.OracleHCMCloudConnector | | Oracle HRMS | sailpoint.connector.OracleAppsHRMSConnector sailpoint.connector.JDBCConnector | | Oracle Netsuite | openconnector.connector.netsuite.NetsuiteConnector | | PeopleSoft ERP | openconnector.connector.PeopleSoftConnector sailpoint.connector.OpenConnectorAdapter | | PeopleSoft HRMS | sailpoint.connector.PeopleSoftHRMSConnector | | RemedyForce | sailpoint.connector.ForceConnector | | RSA Authentication Manager | openconnector.connector.RSAConnector openconnector.connector.rsa.RSAHTTPClient sailpoint.connector.OpenConnectorAdapter | | Salesforce | sailpoint.connector.ForceConnector | | SAP Concur | openconnector.connector.sapconcur.SAPConcurConnector | | SAP - Direct | sailpoint.connector.SAPConnector sailpoint.connector.SAPInternalConnector | | SAP GRC | logger.SAPGRCConnector.name = sailpoint.connector.sapgrc logger.SAPGRCConnector.level = debug logger.SAPGRCConnector.additivity = false logger.SAPGRCConnector.appenderRef.rolling.ref = STDOUT | | SAP HR/HCM | sailpoint.connector.SAPHRInternalConnector | | SCIM 1.1 | openconnector.connector.SCIMConnector sailpoint.connector.OpenConnectorAdapter | | SCIM 2.0 | openconnector.connector.scim2.SCIM2Connector sailpoint.connector.OpenConnectorAdapter | | ServiceNow | openconnector.connector.servicenow.ServiceNowConnector openconnector.connector.servicenow.ServiceNowRestClient sailpoint.connector.OpenConnectorAdapter | | ServiceNow Service Desk Integration | openconnector.connector.servicedesk.ServiceNowServiceDeskConnector sailpoint.connector.OpenConnectorAdapter | | Siebel | openconnector.connector.SiebelConnector sailpoint.connector.OpenConnectorAdapter | | Snowflake | openconnector.connector.snowflake.SnowflakeConnector sailpoint.connector.OpenConnectorAdapter | | Solaris | openconnector.connector.unix.SolarisConnector openconnector.connector.unix.UnixConnector sailpoint.connector.OpenConnectorAdapter | | SuccessFactors | sailpoint.connector.SuccessFactorsConnector | | Sybase | sailpoint.connector.SybaseDirectConnector sailpoint.connector.JDBCConnector | | Webex | openconnector.connector.Webex sailpoint.connector.OpenConnectorAdapter | | Workday | openconnector.connector.WorkDay sailpoint.connector.OpenConnectorAdapter | | Workday Accounts | openconnector.connector.workdayaccounts openconnector.connector.workdayaccounts.WorkdayAccountsConnector sailpoint.connector.OpenConnectorAdapter | | Web Services | sailpoint.connector.WebServices | | XML | openconnector.connector.XMLConnector sailpoint.connector.OpenConnectorAdapter | | Yammer | openconnector.connector.YammerConnector sailpoint.connector.OpenConnectorAdapter | | Zoom | openconnector.connector.zoom.ZoomConnector sailpoint.connector.OpenConnectorAdapter | # Troubleshooting If you encounter any of the following issues or errors, SailPoint recommends that you follow the guidance provided below to resolve the error before contacting SailPoint Support. For issues or errors that are not addressed in this connector guide, refer to the following resources for troubleshooting information: - [SailPoint Identity Services Documentation]() - [SailPoint Support Knowledge Base]() - [SailPoint Developer Community]() ## Aggregation Errors ```text Retryable exception has occurred. Retry after 10000 MS ``` Warning message observed while performing account aggregation: **Resolution:** A retryable exception was received from MEDITECH. You can ignore this warning message and aggregation will be successful in this case. ```text Web Services Failed to Execute - connector.sdk.webservices.exception.WebServicesSdkException: {"resource":"v1/resource/error/_version/1/","detail":"resource not found"} ``` Occurs in the account aggregation: **Resolution:** Whenever there are UNV records without MIS person record present in the MEDITECH system, no records are fetched from MEDITECH and this error message is populated in the logs. You can ignore this warning message. ## Operations Errors ```text [ ConnectorException ] [ Error details ] Request execution failed. {"resource":"v1/resource/error/_version/1/","detail":"Internal Server Error"}. Status: 500 ``` Operation fails **Resolution:** Verify the MEDITECH system is up and running. There must be a smooth connection to MEDITECH system. ## Create Account Errors ```text [ ConnectorException ] [ Error details ] Request execution failed. {"resource":"v1/resource/error/_version/1/","detail":"Conflict"}. Status: 409] ``` Fails while creating account in MEDITECH **Resolution:** Verify the mnemonic value is unique and account does not exist in the MEDITECH system. ```text Cannot assign multiple roles. Ensure that only one role is selected. ``` **Resolution:** MEDITECH accounts can not be created with multiple roles. Make sure that only one role is provided while creating the account. ```text sailpoint.connector.InvalidRequestException: [ InvalidRequestException ] [ Error details ] Invalid request received to MEDITECH System. Status: 400, Output {"resource":"v1/resource/error/_version/1/","detail":"invalid mnemonic value"} ``` Create account fails in MEDITECH. **Resolution:** Verify the mnemonic value is provided with upper case letter and with a maximum of 10 characters. > [!NOTE] > > If mnemonic value is not provided, the default value would be the first character of `firstName`, seven characters of `lastName`, and a two digit random value of the user. For example, for `firstName=Alfa`, `lastName=Bravo`, then the mnemonic would be `ABRAVO1E`. ```text sailpoint.connector.InvalidRequestException: [ InvalidRequestException ] [ Error details ] Invalid request received to MEDITECH System. Status: 400, Output: {"detail":"Request Validation Failed"} ``` Create account fails in MEDITECH. **Resolution:** Verify the required mandatory parameters are provided while creating the account. # Timeout Errors and Settings Timeout errors might occur when SailPoint is waiting for a response from the Virtual Appliance (VA). These errors are applicable to all connectors and tend to occur during the setup of sources or when sources are down. This document is designed to give specific information that can be used to resolve these errors. Each timeout attribute has a default time value that is listed in seconds or minutes. Increasing the time value may resolve the error as it will allow for longer communication time between the two systems, thus avoiding the timeout error. > [!IMPORTANT] > > Add the necessary attributes or values before performing the "replace" operation, as missing attributes will cause the operation to fail. To increase the communication time, increase the value of the appropriate timeout attribute. Then submit the change to the VA using the SailPoint REST API. > [!NOTE] > > For more information on SailPoint's REST APIs, refer to [Best Practices: REST API Authentication]() and [REST API - Update Source (Partial)]() in the SailPoint Developer Community. ### aggregateTimeout **Description:** This parameter is set for the aggregation timeout, measured in seconds. **Resolution:** Increase the `aggregateTimeout` value gradually to optimize aggregation. Start with 180, then increase to 600, 900, and finally 1800. The maximum value is 3600 seconds. For example: If your current time value is 180 seconds, update the `aggregateTimeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/aggregateTimeout", "value": 600 } ] ``` ### healthCheckTimeout **Description:** This parameter is set for the test connection and health check timeout. **Resolution:** The default value is 30 seconds. If the timeout error continues, increase the value in 15 second increments and try again. For example: If your current time value is 30 seconds, update the `healthCheckTimeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/healthCheckTimeout", "value": 45 } ] ``` ### provisioningTimeout **Description:** This parameter is set for provisioning timeout. **Resolution:** Increase the `provisioningTimeout` value gradually to optimize provisioning. Start with 180, then increase to 360, and finally 600. The maximum value is 600 seconds. For example: If your current time value is 180 seconds, update the `provisioningTimeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/provisioningTimeout", "value": 360 } ] ``` ### timeout **Description:** This parameter is set for pass-through authentication timeout. **Resolution:** The default value is 15 seconds. If the timeout error continues, increase this value in 15 second increments and try again. For example: If your current time value is 15 seconds, update the `timeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/timeout", "value": 30 } ] ``` ### apiTimeout **Description:** This parameter is set for API time tracking; customers can check it using an external tool. **Resolution:** The default value is 60 seconds. If the error continues, increase the value by 15 second increments and try again. For example: If your current time value is 60 seconds, update the `apiTimeout` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/apiTimeout", "value": "75" } ] ``` ### timeoutInSeconds **Description:** This parameter helps prevent the VA from waiting indefinitely for an API response, ensuring efficient handling of API requests. For example: If your current time value is 30 seconds, update the `timeoutInSeconds` attribute as follows: ```json [ { "op": "replace", "path": "/connectorAttributes/timeoutInSeconds", "value": "15" } ] ```